IP68 ABS plastic Wired guardrail delineator for Tunnel Single-Side 5 LED 180*40mm
Introductions :
The wired road stud is an eye-catching warning sign. It can clearly outline the road especially in rainy & foggy days and at night, playing an important guiding role. This system is also suitable for tunnels where there is no sunlight and continuous & sufficient power supply is needed. Besides, the system with fog detection can easily detect the road condition and automatically enhance its brightness.
Application:
Expressway, tunnel, Roundabout, Safety Island, Approach road shoulder, entrances & exits' edge line of Underground parking lot, Tunnel wall, Curve or dangerous road, Foggy area,The Ramp,non-street light area etc.
Advantages of wired guardrail delineator:
1. Powered by electric supply, it works well where there is little or no sunshine.
2. Better warning effect with both super-bright LED and reflector.
3. Visible distance up to 500m, perfect warning function in rainy & foggy weather.
4. Circuit-protection, avoid damage to the whole system when a single internal unit fails.
5. Easy installation, low failure rate
6. Delicate appearance and good transmittance
Speicification:
Body Material | ABS engineering plastic |
Dimension | 180*40mm |
Weight | 450g |
Controller Voltage | AC85-265V,50 HZ |
Delineator Voltage | DC 24V, 1 side≤0.45W |
Input voltage | 12-24V or 220V |
Reflector & LED color | yellow,red,white,blue,green |
Luminous intensity | 6000mcd / LED bead |
LED chip | Taiwan Epistar super-bright LED |
Flashing mode | 1. constant,flash |
2. synchronous flashing (a controller is needed) |
Frequency | 90times/min or customized |
Cable length | 60cm or upon your requirements |
Guide line | 2*0.5m² |
Inner fille | epoxy resin |
Visible distance | > 500m |
Ingress protection | IP68 |
Packaging | 1. 128pcs/58.6kgs/620*380*180/carton |
2. as customized |
Warranty | one year |
Lead time | 1-5 days for sample, 10-15 days for bulk order |
Payment terms | T/T, L/C, Western Union, PayPal 40% TT before production+balance before shipment EXW/CIF/CNF/FOB |
Installation Procedure :
• Check if the solar stud charges and discharges normally
• Identify the place for installation • Clean road surfaces
• Clean the bottom of the solar stud and use epoxy glue to stick it to the ground
• Wait 8 hours for drying before activating solar stud
• Caution: never installed in the central line
More photos:
About us:
Road, Ming Road is specialized in roadway & traffic safety products with over 15 years' experience.
All products are quality approved and all solar products are CE certificated. Each solar product will be tested forat least 72 hours before shipment. We have been exporting to New Zealand, America, Europe, Mid-East and South-East Asia.
Our products can meet most requirements and tests in America, Europe, New Zealand, Mid-East and all over the world. We promise to supply a high quality products with best service, OEM and ODM are welcomed. Welcome to visit our factory!
Our advantages:
1. Professional R&D team
2. Specialised in roadway safety & traffic control products since 2006.
3. Quality assurance:
Each solar road stud or solar traffic sign will be tested over 72 hours before shipment.
4.Competitive prices based on big production capacity.
5.OEM & ODM is welcome..
6.Flexible: Small orders acceptable.
7.Best after-service:
We have a good afer-service team while each product is trackable.
FAQ:
1) Q:Are you factory/ manufacturer?
A:Yes,we are factory/manufacturer for traffic facilities including solar traffic signs/signal, regular road safety signs/signal ,radar speed, reflective vest, traffic cone, road construction signs, road stud, traffic wand, traffic light, warning triangle and so on with almost 12 years experience, welcome to visit us, please let us know in advance if you will come.
2) Q:Do you accept OEM/ODM, how can I choose the most suitable model?
A:Yes,OEM/ODM are welcome! You need provide your specific request firstly and we will provide you a reference according to your requirements, it is ok if you are just have a asking.
3) Q: What is your warranty?
A: It is 12 months
4) Q: How to deal with the problem that we buy you product but don't know how to use ?
A: We can take a video for you or we can use WhatsApp/skype/wechat for video teaching
5) Q: How do you ship them?
A:By sea, air and Express( Fedex , UPS, DHL or TNT)according to your preference, of course you can use your own forwarders.
Express way is about 3-5 days, air shipment is about 3-4 days, sea shipment is about 30 days, of course we can accept using your own forwarders.
6) Q: How long is the lead time for production?
A: For a small order, 3-5 days is OK; for a bulk order, 15-20 days depending on the quantity.
7) Q:What is your payment way?
A:T/T ,western union or cash, trade assurance is also ok.
8) Q:How to place orders?
A: 1. Email us the model and quantity, consignee information, shipping way and payment terms;
2. Proforma Invoice made and sent to you;
3. Complete Payment after confirming the PI;
4. Confirm Payment and arrange production.
9) Q:Is this retail product?
A: Sorry , it is wholesale product, but we accept sample order for quality checking!
10) Q: Why choose US?
A:We are a manufacturer not trading company, we have produced the road safe products for years in Shenzhen, so the price is quite competitive in the market, and the quality is superior.
Our Service:
OEM/ODM are always welcome.
If you need design by yourself, you can provide us your design. The sample fee will depend on your design.
Sample making time: 7-10 days, will finish ASAP if urgent.
Sample fee will be refund or according to clients' order quantity.
Delivery time:
Samples order is about 5-7 work days after payment confirmed;
Bulk order is about 10-20 work days after payment confirmed.
Payment term:
*T/T.
*L/C if the total cost amount $100,000
*Western union,Paypal
*Trade assurance